SA-DEC-4-DC-F Décodeur aiguillage DCC Switch decoder 4-fold

SA-dec-4-dc-f LDT décodeur aiguillage dcc / switch decoder 4-fold for DCC

Pour la commande digitale de: 

• Quatre aiguillages ou signaux
• Huit dételleurs ou accessoires à commande impulse
• Quatre interrupteurs permanents DSU
• 1A de courant par sortie
• Entrée séparée pour l’alimentation
• Connexion facile par des connecteurs à vis
• Programmation de l’adresse par une touche
• Les sorties peuvent aussi être commandées par les fonctions de locomotives F1 à F4 (seulement DCC)

For digital control of:

• Illuminations and motors.
• For consumers up to 4Ampere each output.
• High-current turnout drives with end-switch: e.g. Märklin gauge 1 turnout and signal drives (without stressing the digital circuit).

The switching-current for the 4 bistable relays will be supplied by the digital circuit or by a separate input from an alternating current output of a model railway transformer (14 to 18Volt ~) to the decoder. Valuable digital current can be saved! Simple and secure connection of the voltage supply and the consumers by screw clips.

SA-DEC-4 is a 4-fold switch decoder but with a self learning decoder address:

• The decoder address can be set by pushing the SA-DEC-4 programming key and the key of the turnout control board or by a switch command of your PC with connected INTERFACE.
• The decoder address will be permanently stored but can always be changed by pressing the programming key again. It’s as simple as that !

A ready to use finished module, finished module in a case or a kit on a 86 x 76 mm pc-board with four bores for mounting purposes are available 
The decoder from our Digital-Professional-Series can operate without any difficulty on your digitall model railroad.
This decoder is 100% compatible with the Märklin-Motorola data format or the DCC standard.
The finished module and the finished module in a case comes with 24 month warranty.
Each SA-DEC-4 decoder will be supplied with a detailed operating-/ assembly instruction.
Those instructions can be found within the next section.